Avoid Common Electrical Hazards in the Home

If properly installed and maintained the electrical systems in the home are designed to provide and carry electricity safely throughout the home.

Here are basic steps to prevent unsafe electrical situations in your home that could cause serious concerns.

ABCHI LT electrical appliances

ABCHI LT electrical appliances

Avoid Overloading – Overloading an electrical circuit by plugging in too many electrical items draws more electricity through the system than it was designed to carry. This can create overheating and have catastrophic results.

  • Fuses that frequently blow or circuit breakers that trip can be a sign of overloading on the circuit.
  • Always use the correctly rated fuse in a fuse panel. As an example, do not use a 30-amp fuse to replace an existing 20-amp fuse. This is a common error by homeowners.
  • Using multi-outlet devices and extension cords can lead to plugging in too many devices into a circuit and overheating the circuit, the device, or the cord.
  • When replacing any outlets consult with a licensed electrical contractor if you have any uncertainty regarding the load rating for your home’s wiring.
ABCHI LT electrical wires attic

ABCHI LT electrical wires attic

Check for hidden Electrical Hazards – Damaged or deteriorated wires can cause shock and fire safety problems. Potential hazards can be detected by:

  • Watching for dimming or flickering lights that may be a sign of a loose connection in a circuit, light fixture, or the electrical service.
  • Checking for overheated plugs, outlets or cords that can be a sign of overloading, possible faulty wiring, or faulty
  • Checking for any loose or damaged outlets and switches and missing covers which are potential hazards. Repair or replacement may be required. All outlets and switches must have covers.
  • If there are Ground Fault Circuit Interrupters installed in the home, they should be tested monthly, as per manufacturer’s instructions, to ensure they are in operable condition. Consider installation of GFCI’s inappropriate areas (such as bathrooms, kitchens, and laundry rooms) where water can come in contact with electricity if they are not installed in the home.
ABCHI LT electrical frayed cords

ABCHI LT electrical frayed cords

Avoid Damaged, or Unsafe Cords – Frayed or damaged extension, fixture and appliance cords can expose wires resulting in electrical shock and potential fire hazard.

  • Extension cords or fixtures/appliances should always have the marking of a recognized certification agency.
  • Check cords regularly and replace if the following are found – worn or damaged areas, worn insulation, splices on the cord or loose/exposed plug parts. The third prong on a three-pronged plug should never be removed.
  • Do not run cords around doorways, under carpeting or furniture where they could be damaged. Extension cords are temporary and should not replace the need for proper installation of wiring and outlets where necessary
  • Select the appropriate cord for the application. They can be designed for either interior only and exterior only applications and are rated in amps and must be used within the ampere rating.

A complete home inspection from one of our fabulous inspectors includes a visual inspection of the electrical systems and components in the home. The inspector will identify and report on any deficiencies and safety issues noted and make recommendations should consultation with a licensed electrical contractor be required.

Call, text or schedule your next inspection online abuyerschoice.com/lone-tree